I've installed QTP TE add-in 8.0 and updated it. but when I start QTP, it fails with "TE support is not configured correctly".see attached.
You will have a bat file named "QuickTestProfessional.bat" and "QuickTestProfessional.TEAddin.bat" in the bin directory of the your installation folder.
Run them and start QTP , this should fix your problem.
-- Here to Learn and share ---
Try thisRef QTP8.2)
Click ok on the warning message.
Go to options->
You will find the TE add-in tab
Configure the TE: Select the right vendor, emulator and protocol. I think this should solve.
I have not used TE but i guess you need to configure the add-in on your application before you start using it.
Buy the NEW QTP Descriptive Programming Unplugged Book
** Download QTP Unplugged 2nd Edition eBook for FREE **
Thanks for your replay, Naveen, I've done what you mentioned, but it still shows the error.
I have used TE and have come across this. This essentially means that you have to configure the TE add-in in your QTP.
thanks Vengat Ramanan.R , I am going to options to configure them
thanks Vengat Ramanan.R
I don't know which vendor, Emulator should be selected
Please ask your infra team or the development team.
You could try out all the combinations. [img]/images/graemlins/smile.gif[/img]
Select Auto-Detect for protocol.
Try Seagull as Vendor and BlueZone as emulator.
Lets try our luck.